Capstone C30 Microturbine | Pure World Energy

The C30 is part of the Capstone range of clean and green turbines, which are scalable from 30kW to 30MW and can operate on a variety of gaseous or liquid fuels. Capstone turbines are the ideal solution for today's distributed generation needs.

Capstone C30 Microturbine Specifications

Rating:30 kW
Electrical Service:3-Phase, 4-Wire
Net Heat Rate LHV:13.8 MJ/kWh (13,100 BTU/kWh)
Electrical Efficiency LHV:26.00%
Width:0.76 m (30 in)
Exhaust Temperature:275ºC (530ºF)
Combined Heat and Power Efficiency:Up to 90%
Height:1.8 m (70 in)
Exhaust Gas Flow:0.31 kg/s (0.68 lbm/s)
Voltage:400-480 VAC
Weight:Grid Connect - 405 kg (891 lb); Dual Mode - 578 kg (1,271 lb)
Frequency:50/60 Hz, Grid Connect 10-60 Hz, Stand Alone
Depth:1.5 m (60 in)
Compatible Fuels:Natural Gas, Liquid Fuels (Kerosene, Aviation Fuels, Ultra Low Sulfur Diesel #2), Biogas (Landfill, Digester), Associated Gas, Sour Gas, Propane Gas

Notes

Nominal full power performance at ISO conditions: 59˚F (15°C), 14.696 psia (101.325 kPa), 60% RH.
Height dimensions are to the roofline. Exhaust outlet can extend up to 7 inches above the roofline.
Specifications based on high pressure natural gas systems. Values may vary with other fuel types.

Specifications are not warrantied and are subject to change without notice.

Data Sheets

C30 High Pressure Natural Gas

Capstone Global Case Studies

Capstone microturbines are the ideal solution for today’s distributed generation needs. As the world’s leading clean technology manufacturer of microturbine energy systems, Capstone products are used by many of the Fortune 500 top global companies.

View Case Studies